3-64 SHB 28Z3 EN – Edition 2.0 * 28z3s314.fm
Maintenance
Exterior of the machine
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Danger!
Clean the engine at engine standstill only –
Danger of personal injury!
☞ Stop the engine before cleaning
Caution!
When cleaning the engine with a water or steam jet
☞ The engine must be cold
☞ and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage!
Shatter protection
Clean the window only with water and a mild soap solution.
Do not use aggressive detergents!
Do not use brushes, steel wool or similar abrasive means. Never wipe dust in a dry state.
Screw connections and attachments
All screw connections must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
Retighten loose connections immediately. Contact an authorised workshop if necessary.
Pivots and hinges
All mechanical pivot points on the machine (e.g. door hinges, joints) and fittings (e.g. door
arresters) must be lubricated regularly, even if they are not listed in the lubrication plan.
To Next Page
Loading...
Need help?
General
