SHB 28Z3 EN – Edition 2.0 * 28z3s312.fm 3-13
Maintenance
Refuelling
Filler inlet A for the fuel tank is located behind the cab, on the left in driving direction.
Danger!
All work involving fuel carries an increased
Danger of fire and poisoning!
☞ Do not refuel in closed rooms
☞ Never carry out work on the fuel system in the vicinity of naked flames or
sparks
☞ No smoking, no fire!
Use a suitable container to collect the fuel as it drains and dispose of it in an environmen-
tally friendly manner!
Notice!
Do not run the fuel tank completely dry. Otherwise, air is drawn into the fuel sys-
tem. This requires bleeding the fuel system
– see Bleeding the fuel system on page 3-14.
Notice!
Fill up the tank with the correct fuel type at the end of each working day. This pre-
vents condensation water from forming in the fuel tank over night. Do not fill the
tank completely but leave some space for the fuel to expand.
Emptying the fuel tank
Filler inlet A for the fuel tank is located in the valve compartment, on the left in driving
direction.
Proceed as follows:
Danger!
All work involving fuel carries an increased
Danger of fire and poisoning!
☞ Do not work in closed rooms
☞ Never carry out work on the fuel system in the vicinity of naked flames or
sparks
☞ No smoking, no fire!
Fig. 1: Fuel filler inlet
A
A
To Next Page
Loading...
Need help?
General
