1-16 SHB 28Z3 EN – Edition 2.0 * 28z3s110.fm
Operation
1.14 Stop and park the machine
Caution!
Never stop the engine under full load, otherwise it can be damaged due to
overheating.
☞ Let the engine run at idling speed with no load for at least 5 minutes before
you switch it off.
• Stop the machine on firm, level and horizontal ground.
• Position the boom straight ahead at the centre of the machine.
• Lower the stabiliser blade to the ground.
• Stop the engine.
• Operate the joystick repeatedly to release the pressure in the hydraulic system.
• Remove the ignition key and carry it with you.
• Fold the control lever base up.
• Close the windows and the door.
• Leave the cab.
• Close and lock all covers.
• Secure the tracks accordingly (e.g. chocks, etc.).
Parking the machine on slopes
• Lower the bucket into the ground on the downhill side of the machine.
• Place the stabiliser blade downhill and lower it to the ground.
• Secure the tracks accordingly (e.g. chocks, etc.) so the machine cannot move.
Fig. 13: Parking the machine
Fig. 14: Parking on slopes
To Next Page
Loading...
Need help?
General
