SHB 28Z3 EN – Edition 2.0 * 28z3s210.fm 2-15
Specifications
2.17 Lift capacity table 28Z3 short stick and extra weight (option)
All table indications in kg (lbs.) and horizontal position on firm ground without bucket.
If equipped with a bucket or other attachments, lift capacity or tilt load is reduced by bucket
or attachment dead weight.
Calculation basis: according to ISO 10567
The machine's lift capacity is restricted by the settings of the pressure limiting valves and
the hydraulic system's stabilising features.
Neither 75 % of the static tilt load nor 87 % of the hydraulic lift capacity is exceeded.
3.5 m (11.5 ft) 3.0 m (9.8 ft) 2.5 m (8.2 ft)
A
B
Lowered blade Lowered blade Lowered blade Lowered blade
3.0 m
(9.8 ft)
508*
(1121*)
427
(941)
492*
(1085*)
483*
(1085*)
2.0 m
(6.6 ft)
489*
(1078*)
320
(706)
492*
(1084*)
366
(808)
525*
(1157*)
472
(1041)
588*
(1297*)
588*
(1297*)
1.0 m
(3.3 ft)
494*
(1088*)
290
(640)
554*
(1222*)
348
(768)
663*
(1463*)
437
(965)
872*
(1923*)
568
(1253)
0.0 m
(0.0 ft)
504*
(1110*)
304
(670)
581*
(1282*)
335
(738)
731*
(1611*)
414
(914)
967*
(2132*)
536
(1182)
-1.0 m
(-3.3 ft)
498*
(1098*)
391
(863)
605*
(1335*)
417
(919)
805*
(1774*)
540
(1191)
Fig. 5: Lift capacity table (model 28Z3)
max. Admissible load on extended stick
A Reach from live ring centre
B Load hook height
* Lift capacity limited by hydraulic system
With the stabiliser blade in driving direction
Without the stabiliser blade, 90° to driving direction
To Next Page
Loading...
Need help?
General
