SHB 28Z3 EN – Edition 2.0 * 28z3s210.fm 2-13
Specifications
2.15 Lift capacity table 28Z3 (short stick)
All table indications in kg (lbs.) and horizontal position on firm ground without bucket.
If equipped with a bucket or other attachments, lift capacity or tilt load is reduced by bucket
or attachment dead weight.
Calculation basis: according to ISO 10567
The machine's lift capacity is restricted by the settings of the pressure limiting valves and
the hydraulic system's stabilising features.
Neither 75 % of the static tilt load nor 87 % of the hydraulic lift capacity is exceeded.
3.5 m (11.5 ft) 3.0 m (9.8 ft) 2.5 m (8.2 ft)
A
B
Lowered blade Lowered blade Lowered blade Lowered blade
3.0 m
(9.8 ft)
508*
(1121*)
387
(854)
492*
(1085*)
426
(939)
2.0 m
(6.6 ft)
489*
(1078*)
280
(617)
492*
(1084*)
319
(703)
525*
(1157*)
414
(914)
588*
(1297*)
559*
(1233*)
1.0 m
(3.3 ft)
494*
(1088*)
249
(548)
554*
(1222*)
301
(664)
663*
(1463*)
380
(838)
872*
(1923*)
495
(1091)
0.0 m
(0.0 ft)
504*
(1110*)
257
(566)
581*
(1282*)
287
(633)
731*
(1611*)
357
(787)
967*
(2132*)
463
(1020)
-1.0 m
(-3.3 ft)
498*
(1098*)
324
(714)
605*
(1335*)
359
(792)
805*
(1774*)
467
(1029)
Fig. 3: Lift capacity table (model 28Z3)
max Admissible load on extended stick
A Reach from live ring centre
B Load hook height
* Lift capacity limited by hydraulic system
With the stabiliser blade in driving direction
Without the stabiliser blade, 90° to driving direction
To Next Page
Loading...
Need help?
General
