3-10 SHB 28Z3 EN – Edition 2.0 * 28z3s311.fm
Maintenance
1. Drain engine oil the first time after 50 s/h, then every 250 s/h
2. Replace the engine oil filter the first time after 50 s/h, then every 250 s/h
3. Replace the fuel filter the first time after 50 s/h, then every 500 s/h
4. According to the fouling indicator, every 1000 s/h or once a year at the latest. (Replace after 50 s/h when in extensive use in environments with acidic air, such as acid production facilities, steel and aluminium mills, chemical plants and other nonferrous-metal plants)
5. Replace the hydraulic oil filter insert the first time after 50 s/h, then every 500 s/h
6. Drain the hydraulic oil the first time after 500 s/h, then every 1000 s/h
7. Drain the gearbox oil the first time after 50 s/h, then every 1000 s/h
8. Clean the water ducts every other 1000 s/h servicing
9. Check the first time after 50 s/h, then every 500 s/h
10. Check once a week
11. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
12. Check once a week
13. Switch on once every week
14. Switch on once every week
To Next Page
Loading...
Need help?
General
