Xerox 4590/4110 Copier/Printer User Guide
2-75
2. Copy
Watermark
You can lightly print a sequential control number on the
background of each copy set. For example, if you set "1" for the
start number, "1" is printed on all pages of the first copy set and "2"
is printed on all pages of the second set.
To prevent, for instance, the duplication of confidential documents
for distribution at conferences, you can use sequential numbering
to associate distribution copies to people.
KEY POINT: When you select this feature, if the number of the
document pages exceeds the maximum that the machine can
scan, the portion of the document already scanned cannot be
printed, copied, or saved. In this case, cancel the job following the
message that is displayed.
The maximum number of the document pages that can be
scanned is 2,000 pages per job. For multiple jobs, the maximum is
about 20,000 pages altogether if the document size is 8.5 x 11 in./
A4 and Letter. This figure should only be used as a guide, since
the maximum number of the document pages the machine can
scan depends on the types, sizes and direction of the document.
The font size or density printed by multiple control can be
configured in the system settings. For more information, refer to
the System Administration Guide.
1. From the Output Format tab, select Watermark.
2. Select On.
3. Select any item.
4. Select Save to keep your choices.
îš„ Off
Watermark is not applied to copies.
îš„ On
Watermark is applied to copies.
To Next Page
Loading...
Need help?
General