Xerox 4590/4110 Copier/Printer User Guide
3-46
3. Scan
Reduce/Enlarge
You can set the scanning ratio for the documents to be scanned.
1. From the Scan Options tab, select Reduce/Enlarge.
2. Select the desired scanning ratio.
3. Select Save to keep your changes.
îš„ 100%
Scan is made at the same size as the document.
îš„ Preset%
Select from twelve preset scanning ratios.
You can change the indicated ratios. For more information about
settings, refer to "Reduce/Enlarge Presets" in the System
Administration Guide or ask your System Administrator for help.
îš„ Variable%
You can scan by selecting a variable ratio. The ratio can be set in
increments of 1% within the range 25-400%.
îš„ Auto%
The copy ratio is automatically set based upon the document and
paper sizes specified in Output size, and the document is
scanned to fit in the specified size. This automatically sets the
scanning ratio based on the document size and specified
Output Size.
NOTE: White space remaining after scanning with Auto% is blank
data.
To Next Page
Loading...
Need help?
General