Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
4-37
4. Mailbox Management
Watermark
This feature allows you to lightly print sequential control numbers
on the background of documents. For example, if you set "1" for
the start number, "1" is printed on all page of the first set of copies,
and "2" is printed on all pages of the second set.
These numbers can be used for documents, such as confidential
documents that will be distributed at meetings, to control number
of copies made and to prevent copies from being duplicated.
The sizes and shades of the numbers can be programmed on
System Settings. For more information, refer to the System
Administration Guide, Chapter 9, “Watermark” on page 4-37.
1. Select Watermark.
2. Sect an item.
 Control Number
Select whether or not to print control numbers on the output.
 Start Number
The control numbers can be set within the range of 1 to 9999. The
start number can be entered using [s] and [t] or the numeric
keypad.
 Text
Displays the [Set Numbering - Text] screen. For more information,
refer to “Watermark - Text Screen” on page 4-38.
 User Account Number
Whether or not to print your user account number can be set. If
you want to print your user account number, add a check mark.
NOTE: This feature appears only when the auditron
administration features are being used.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English