Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
7-19
7. Paper and Other Media
Change/confirm the tray settings
If paper tray types have been changed, the settings must be
modified to reflect the paper that is loaded in the tray. The
following describes how to change or confirm the paper attributes
of the paper loaded in the trays.
Change/confirm the tray settings from the All Services screen
NOTE: The UI screens shown may or may not reflect your system
configuration. The UI screens vary from system to system and
from marketplace to marketplace. Therefore, the UI screens
shown here are a representation of the type
of screens that may
be seen on your particular system
You can manually confirm and/or change the paper settings (such
as weight, size, type, etc.) from the All Services/Setup Menu on
the printer UI.
KEY POINT: To change or confirm the tray settings from the All
Services screen, the System Administrator must program the
Setup Menu in System Settings so that the Paper Tray
Attributes feature is enabled
. For more information, see your
System Administrator, or refer to the System Administration
Guide, Chapter 8, Setups, the section entitled “Setup Menu.”
1. From the Printer UI All Services screen, select Setup
Menu.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English