Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
6-7
6. Stored Programming
Naming/Renaming a Stored Program
This is the procedure for naming or renaming a Stored Program.
Up to 18 characters are allowed in a Stored Program name.
1. From the All Services screen, select Setup Menu and then
Stored Program. Select Enter/Change Name.
2. Select the number of the stored program to add or change the
name.
NOTE: Select to display the previous screen and select to
display the next screen.
3. Enter the name, and select Save.
4. Confirm the name change.
5. Select Close to save your changes.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English