Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
2-64
2. Copy
Annotation
You can add a stamp, date, and page number not included on the
document to copy paper when outputting copies.
You can select from already provided formats for the stamp type,
date, page number, and printing position.
KEY POINT: When you select this feature, if the number of the
document pages exceeds the maximum that the machine can
scan, the portion of the document already scanned cannot be
printed, copied, or saved. In this case, cancel the job following the
message that is displayed.
The maximum number of the document pages that can be
scanned is 2,000 pages per job. For multiple jobs, the maximum is
about 20,000 pages altogether if the document size is 8.5 x 11 in./
A4 landscape. This figure should only be used as a guide, since
the maximum number of the document pages the machine can
scan depends on the types, sizes and direction of the document.
NOTE: The annotation image and character size is not changed
even if you set the enlarge/reduce setting.
If a stamp, date, and page are specified at the same time,
we recommend confirming that none of the positions
overlap before making copies.
If Multiple-Up is set, the annotation is added to the
combined image.
If Repeat Image or Booklet Creation is set, the
annotation is added to each individual image.
1. On the All Services screen, select Copy. Select the Output
Format tab and then select Annotation.
2. Select any item

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English