Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
2-90
2. Copy
 Chapter Division/Separators
Displays the Build Job - Chapter Division/Separators screen.
 Separators
Displays the Build Job - Separators screen.
For information about watermark feature, refer to “Build Job -
Separators Screen” on page 2-88.
 Sheet Change
Displays the Build Job - Sheet Change screen. Using the
numeric keypad to change the number of copies. You can change
the number of copies.
 Sample Set
When making multiple copies, you can output a single sample in
advance. Making sample copy allows you to confirm that the copy
appearance meets your expectations. After checking the sample
copy, you can choose whether to make the remaining copies, or to
cancel copying.
Sample Set Screen
This feature allows you to continue making copies after making
and examining a sample set of copies, when making multiple
copies. You can select to continue or cancel the job after the
confirmation and can also change the number of copies. The
sample set is included in the number of copies you specified.
When making the remaining copies, the number of copies which
pulled the part of a sample copy from the specified number of
copies is printed.
1. From the Job Assembly tab, select Build Job and then select
Sample Set.
2. Make a selection.
3. Select Save to save your choice.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English