Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
3-47
3. Scan
Output Format
In the Output Format screen under E-mail, Scan to Mailbox,
Job Template, or Scan to FTP/SMB, you can configure the
output format.
NOTE: If you have the optional Color Scanner Kit installed, the
screen will be different than the one shown below. Any differences
are noted in the sections below.
1. From the All Services screen, select either E-mail,
Scan to Mailbox, Network Scanning, or
Scan to FTP/SMB.
2. Select the Output Format tab.
3. Make a selection.
NOTE: Fields displayed vary depending on the selected feature.
The screen above is for the e-mail feature.
Image Compression (optional Color Scanning Kit only)
This feature allows you to change the compression rate on
scanned images.
The higher the compression rate, the smaller the file size and the
poorer the image quality.
The lower the compression rate, the bigger the file size and the
better the image quality.
If Black is selected as the Output Color, the Image Compression
feature is not available.
1. From the Output Format tab, select Image Compression.
2. Select the level of compression desired.
3. Select Save to keep your changes.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English