Xerox 4590/4110 Copier/Printer User Guide
2-85
2. Copy
Copy Output - Hole Punching Screen
You can select the punching position other than the position
displayed on the Finishing screen.
1. From the Finishing screen, in the Staple Position area,
select Hole Punching.
2. Make a selection.
3. Select Save to keep your choice.
NOTE: 3 holes can be set depending on a optional package. For
more information, contact the Customer Support Center.
îš„ Off
No punch position is selected.
îš„ 2 Holes
You can select two positions for punching.
îš„ 4 Holes
You can select four positions for punching.
To Next Page
Loading...
Need help?
General