04/2016
4-16
Phaser 4600/4620/4622 Printer Service Manual
REP 3.5
Revised
4 Repairs and Adjustments
REP 3.5 IP Board Cage
Parts List on PL 3.10 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove Tray 2.
2. Remove the Duplex Unit, REP 10.1.
3. Remove the IP Board Cover, REP 28.1.
4. Remove the Right Cover, REP 28.2.
5. Disconnect 5 connections (CN8, CN10, CN12, CN13, and CN14) to the IP Board and
feed the harnesses out the holes provided, Figure 1.
Figure 1 Disconnect the IP Board
6. Remove 2 screws (metal) and slide the IP Cage to the rear to release 2 hooks that
secure the cage to the chassis, Figure 2.
To Next Page
Loading...
Need help?
General