04/2016
4-53
Phaser 4600/4620/4622 Printer Service Manual
REP 7.37, REP 7.38
4 Repairs and Adjustments
Revised
Figure 3 Remove the Stack Height Sensor
REP 7.38 HCF Rear Cover
Parts List on PL 7.20 Item 2
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Cover removal is possible without removing the feeder from the printer.
1. Remove 2 screws (metal) that secure the rear cover to the chassis, Figure 1.
Figure 1 Remove the rear cover
To Next Page
Loading...
Need help?
General