Xerox Phaser 4600 Service Manual

04/2016
5-14
Phaser 4600/4620/4622 Printer Service Manual
PL 7.10
Revised
5 Parts List
PL 7.10 Paper Tray (Tray 2 & Optional
Feeder)
Item Part Description
1 – Front cover (P/O PL 7.10 Item 23)
(REP 7.22)
2 – Tray frame (P/O PL 7.10 Item 23)
3 – Tray lift plate (P/O PL 7.10 Item 23)
4 – Left width paper guide (P/O PL 7.10
Item 23)
5 – Right width paper guide (P/O PL
7.10 Item 23)
6 022N02232 Separator roller (REP 7.20)
7 022N02231 Separator clutch (REP 7.21)
8 017N00259 Torque limiter
9 – Shaft (P/O PL 7.10 Item 23)
10 – Bearing (P/O PL 7.10 Item 23)
11 – Idle shaft (P/O PL 7.10 Item 23)
12 – Lift plate shaft (P/O PL 7.10 Item
23)
13 – Lift shaft plate (P/O PL 7.10 Item
23)
14 – Pad (P/O PL 7.10 Item 23)
15 – Pick-up mounting bracket (P/O PL
7.10 Item 23)
16 – Rack guide (P/O PL 7.10 Item 23)
17 – Rack drive gear (P/O PL 7.10 Item
23)
18 – Sector gear (P/O PL 7.10 Item 23)
19 – Pick-up gear (P/O PL 7.10 Item 23)
20 – Pick-up idle gear (P/O PL 7.10 Item
23)
21 – Tray guide roller (P/O PL 7.10 Item
23)
22 – Media level indicator (P/O PL 7.10
Item 23) (REP 7.23)
23 050N00562 Tray assembly
(See NOTE 1 below)
NOTE: 1. Order 3 of the 022N02232, since it is recommended to
replace all the 3 Feed Rollers (Separator Roller, Nudger Roller,
and Pick Roller) at the same time.

Xerox Phaser 4600 Specifications

General

Brand	Xerox
Model	Phaser 4600
Category	Printer
Language	English