Xerox Phaser 4600 Service Manual

04/2016
4-150
Phaser 4600/4620/4622 Printer Service Manual
REP 28.2, REP 28.3
Revised
4 Repairs and Adjustments
REP 28.2 Right Cover
Parts List on PL 28.10 Item 4
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the IP Board Cover, REP 28.1.
3. Remove 2 screws (metal) that secure the cover to the chassis.
4. Slide the cover to the rear to release 6 hooks to remove the cover, Figure 1.
Figure 1 Remove the Right Cover
REP 28.3 Left Cover
Parts List on PL 28.10 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove 2 screws (metal) that secure the cover to the chassis.
4. Slide the cover to the rear to release 6 hooks to remove the cover, Figure 1.

Xerox Phaser 4600 Specifications

General

Brand	Xerox
Model	Phaser 4600
Category	Printer
Language	English