04/2016
4-64
Phaser 4600/4620/4622 Printer Service Manual
REP 8.27
Revised
4 Repairs and Adjustments
REP 8.27 Registration Roller Assembly
Parts List on PL 8.45 Item 12
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
CAUTION
Cover the Drum Cartridge to prevent light exposure.
1. Remove Tray 2,
2. Open the Top Door.
3. Remove the Toner Cartridge.
4. Remove the Drum Cartridge.
5. Remove the Duplex Unit, REP 10.1.
6. Remove the IP Board Cover, REP 28.1.
7. Remove the Right Cover, REP 28.2.
8. Remove the Registration Clutch, REP 4.3.
9. Remove 4 screws (plastic) that secure the assembly to the frame, Figure 1,
Figure 1 Remove the Registration Roller Assembly screws
10. Raise the left side of the assembly, then remove the registration roller shaft from the hole
in the chassis, Figure 2.
Figure 2 Remove the Registration Roller Assembly
and one more screw behind the front door, REP 28.4.
To Next Page
Loading...
Need help?
General