Xerox Phaser 4600 Service Manual

04/2016
4-22
Phaser 4600/4620/4622 Printer Service Manual
REP 4.2, REP 4.3
Revised
4 Repairs and Adjustments
Figure 3 Remove the Tray 2 Feed Clutch
REP 4.3 Registration Clutch
Parts List on PL 4.10 Item 7
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the IP Board Cover, REP 28.1.
3. Remove the Right Cover, REP 28.2.
4. Disconnect the Registration Clutch (P/J36) from the harness.
5. Remove 2 screws (Gold, metal) that secure the clutch bracket to the Feed Drive, Figure 1.
6. Remove the E-ring that secures the clutch to the shaft.
Figure 1 Remove the Registration Clutch

Xerox Phaser 4600 Specifications

General

Brand	Xerox
Model	Phaser 4600
Category	Printer
Language	English