04/2016
4-121
Phaser 4600/4620/4622 Printer Service Manual
REP 11.3, REP 11.4
4 Repairs and Adjustments
Revised
Figure 2 Disconnect the Mailbox connector
REP 11.4 Mailbox Rear Door
Parts List on PL 11.10 Item 5
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays, REP 11.1.
2. Separate the Mailbox from the printer, GP 14.
3. Remove 2 screws and loosen the side covers.
4. Open the rear door 90 degrees to release the hinges for the side covers, Figure 1.
Figure 1 Remove the rear door
To Next Page
Loading...
Need help?
General