04/2016
4-101
Phaser 4600/4620/4622 Printer Service Manual
REP 10.13
4 Repairs and Adjustments
Revised
REP 10.13 Fuser Heat Lamp
Parts List on PL 10.11 Item 17
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Do not touch the Fuser while it is hot.
CAUTION
Fuser plastic is easily over stressed or broken. Use care when releasing hooks that secure
Fuser covers and guides.
1. Remove the Rear Door, REP 28.6.
2. Remove the Fuser, REP 10.10.
3. Remove 3 screws (2 metal) and (1 plastic) that secure the Fuser top cover, Figure 1.
Figure 1 Remove the Fuser top cover
4. Remove 3 screws (Black, plastic) that secure the duplex cover to the Fuser, Figure 2.
Figure 2 Remove the duplex cover
5. Open the lower exit guide, Figure 3.
To Next Page
Loading...
Need help?
General