Xerox Phaser 4600 Service Manual

04/2016
4-127
Phaser 4600/4620/4622 Printer Service Manual
REP 11.11, REP 11.12
4 Repairs and Adjustments
Revised
REP 11.11 Mailbox Option Harness
Parts List on PL 11.15 Item 4
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays, REP 11.1.
2. Separate the Mailbox from the printer, GP 14.
3. Remove the right cover, REP 11.3.
4. Disconnect P/J1 from the Control Board.
5. Release 2 hooks that secure the connector cover to the right cover and remove the con-
nector, Figure 1.
Figure 1 Remove the option connector
Replacement
Check connector orientation before Mailbox installation.
REP 11.12 Mailbox Output Tray 4 Stack Full Sensor
Parts List on PL 11.30 Item 13
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Mailbox output trays are numbered 1 through 4 with 4 being the top tray.
1. Remove the Mailbox Output Trays, REP 11.1.
2. Separate the Mailbox from the printer, GP 14.
3. Remove the right cover, REP 11.3.
4. Remove the left cover REP 11.2.
5. Remove 4 screws (plastic) that secure the Top Cover to the Mailbox, Figure 1.
Figure 1 Remove the top cover
6. Disconnect P/J141 from the sensor.
7. Release 4 hooks that secure the sensor to the bracket, Figure 2.

Xerox Phaser 4600 Specifications

General

Brand	Xerox
Model	Phaser 4600
Category	Printer
Language	English