Xerox Phaser 4600 Service Manual

04/2016
4-42
Phaser 4600/4620/4622 Printer Service Manual
REP 7.26, REP 7.27
Revised
4 Repairs and Adjustments
REP 7.26 Feeder Left Cover
Parts List on PL 7.15 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Removal of the Left Cover is possible without removing the feeder from the printer.
1. Remove the Tray.
2. Remove 1 screw (plastic) and slide the cover to the rear to release 6 hooks that secure
the cover, Figure 1.
Figure 1 Remove the Left Cover
Replacement
To install the Left Cover on a 550-Sheet Feeder removed from the system, lower the safety
hook into the feeder chassis and with the slider completely forward, replace the cover.
REP 7.27 Feeder Rear Cover
Parts List on PL 7.15 Item 5
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Removal of the Rear Cover is possible without removing the feeder from the printer.
1. Remove the Tray.
2. Remove the Right Cover, REP 7.25.
3. Remove the Left Cover REP 7.26.
4. Remove 2 screws (plastic), and release 2 hooks that secure the Rear Cover,
Figure 1 Remove the Rear Cover

Xerox Phaser 4600 Specifications

General

Brand	Xerox
Model	Phaser 4600
Category	Printer
Language	English