ABB PST72 Installation And Commissioning Manual

Settings and configuration
Chapter 7
92
1SFC132003M0201
7:2.4 Functional Settings
The Functional setting menu consists of groups with
parameters arranged by function such as protection,
warning, fault, fieldbus communication etc. This menu should
be used if a more advanced set-up is required. For a detailed
description of each parameter, see Chapter 10 “Functions” .
Enter the Functional settings
Enter the menu by selecting Functional Settings.
7:2.4.1 Start/Stop
To set parameters related to start and stop, enter the Start/
Stop group. Following parameters are available in this group:
•Setting I
e
• External By-Pass
• Start mode
•Stop mode
• Start ramp
• Stop ramp
• Initial voltage
• End voltage
• Step down voltage
• Current limit level
• Torque limit
• Kick start
• Kick level
•Kick time
• Start range
• Stop range
Setting of parameters from Setting I
e
to Torque limit above,
see “Basic Settings” .
F
igure 25: Functional Settings menu
Application
Settings
Basic
Settings
Functional
Settings
Service
Settings
Presentation
Settings
All
Settings
Changed
Settings
Reset all
Settings
Top level
Settings
Operation
Mode
Start/Stop
Protections
Warnings
Inputs
Faults
Outputs
Fieldbus
F
igure 26: Start/Stop group
Seq Start
Settings
Functional Settings
Torque control
Analog Output

ABB PST72 Specifications

General

Brand	ABB
Model	PST72
Category	Controller
Language	English