AudioCodes MSBG Series User Manual

Version 7.2 825 Mediant 1000B Gateway & E-SBC
User's Manual 51. Viewing VoIP Status
51.4 Viewing Registration Status
You can view the registration status of the device's endpoints (FXS, FXO and BRI) and SIP
Accounts. The registration mode (i.e., per device, endpoint, account. or no registration) is
configured in the Trunk Group Settings table (see Configuring Trunk Group Settings on
page 467) or using the TrunkGroupSettings ini file parameter.
 To view registration status:

Open the Registration Status table (Monitor menu > Monitor tab > VoIP Status
folder > Registration Status).
Table 51-4: Registration Status Table Description
Parameter Description
Registered Per Gateway Registration status of the device as one entity:
 "YES"
 "NO"
Note: The parameter is applicable only to the Gateway
application.
Ports Registration Status Displays the registration status per analog (FXS or FXO)
port:
 "REGISTERED"
 "NOT REGISTERED"
Accounts Registration Status
Displays the status registration per Account, as configured in
the Accounts table (see ''Configuring Registration Accounts''
on page 361).
 Group Type: Served Trunk Group or IP Group
 Group Name: Name of served Trunk Group or IP Group,
if applicable
 Status: "REGISTERED" or "NOT REGISTERED"
Phone Number Status Displays the registration status of BRI endpoints:
 Phone Number: Phone number of endpoint.
 Gateway Port: module/port number of endpoint.
 Status: "REGISTERED" or "NOT REGISTERED"

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English