Bosch D9412GV4 Installation And System Reference Guide

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 112
13. The [ESC] key acts as a [Backspace] key. Press [ESC] to delete the characters, and then enter
the new numbers.
14. Press [ENTER] to save the port number. The keypad shows Parameter Saved, and asks if you
wish to edit the port number.
15. Press [ESC] to return to the list of Enhanced Comms to edit, or press and hold [ESC] to exit
the Installer menu.
B93x/B94x keypads Configuration of Network Address, Poll Rate (seconds), and Port Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [2] Network > [2] Enhanced Comm Parms menu
option. The keypad displays the network address for the selected Enhanced Comm path.
3. Use the [PREV]/ or [NEXT]/ key to go to the path you wish to edit.
4. Press the Edit softkey to change the network address. The existing address and an editing
cursor show.
5. Delete existing characters, if necessary, and then enter the new phone number.
6. Press the Save softkey to save the address. The keypad shows Parameter Saved, returns to the
previous menu.
7. Press the Port # softkey to view the port number, and then press the Edit softkey to edit the
port number.
8. The [ESC] key acts as a [Backspace] key. Press [ESC] to delete characters, and then enter the
new numbers. Press a number key repeatedly to scroll through the number and letters shown
on the key.
9. Press the Save softkey to save the address. The keypad shows Parameter Saved, and returns to
the previous menu.
10. Press the Poll Rate softkey to view the poll rate, and then press the Edit softkey to edit the
poll rate number.
11. The [ESC] key acts as a [Backspace] key. Press [ESC] to delete characters, and then enter the
new numbers. Press a number key repeatedly to scroll through the number and letters shown
on the key.
12. Press the Save softkey to save the address. The keypad shows
Parameter Saved, and returns to
the previous menu.
13. Press the softkey for the desired option (address, port #, poll rate, encryption).
14. Press the Edit softkey to change programming.
15. Press the Save softkey to save programming.
16. When the keypad shows Parameter Saved, escape from the menu.
18.1.3 [1] Reporting > [3] Routing Menu Parameters
Use routing to program primary and/or add backup destinations over standard telephone lines, local-
area networks (LAN), wide-area networks (WAN), or a general packet radio system (GPRS). In this
menu, you can designate the primary and backup destinations for up to four routes.
Route 1Route 2Route 3 Route 4
Primary Device No Device
_
____
_
_____
_
__________
_
__________
_
__________
Backup Device No Device
_
__________
_
__________
_
__________
_
__________

Bosch D9412GV4 Specifications

General

Power Supply	12 VDC
Type	Control Panel
Model	D9412GV4
Manufacturer	Bosch
Operating Temperature	0°C to +49°C (+32°F to +120°F)
Compatible with	Conettix IP, GSM, GPRS, and POTS communicators