Bosch D9412GV4 Installation And System Reference Guide

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 121
RPS Passcode
B91x/B92x keypads Configuration of RPS Passcode
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [3] RPS > [1] RPS Passcode menu option.
3. Press [ENTER] to edit RPS passcode.
4. Delete existing characters, if necessary, and then enter the new characters.
5. Press [ENTER] to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of RPS Passcode
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [3] RPS > [1] RPS Passcode menu option.
3. Press the Enhanced Comm softkey to view and change the enhanced comm option, and then
press the Edit softkey to change the passcode.
4. Delete existing characters, if necessary, and then enter the new characters.
5. Press the Save softkey.
6. When the keypad shows Parameter Saved, escape from the menu.
18.1.9 [3] RPS > [2] RPS Phone Number Menu Parameters
The RPS Phone Number is the number the control panel dials to contact RPS. In this menu, you can
program the RPS phone number.
RPS Phone Number
B91x/B92x keypads Configuration of RPS Phone Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [3] RPS > [2] RPS Phone Number menu option.
3. Press [ENTER] to edit RPS phone number.
4. Delete existing characters, if necessary, and then enter the new characters.
5. Press [ENTER] to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of RPS Phone Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [3] RPS > [2] RPS Phone Number menu option.
3. Press the Edit softkey to change the phone number.
4. Delete existing characters, if necessary, and then enter the new characters.
5. Press the Save softkey.
6. When the keypad shows Parameter Saved, escape from the menu.

Bosch D9412GV4 Specifications

General

Power Supply	12 VDC
Type	Control Panel
Model	D9412GV4
Manufacturer	Bosch
Operating Temperature	0°C to +49°C (+32°F to +120°F)
Compatible with	Conettix IP, GSM, GPRS, and POTS communicators