Bosch D9412GV4 Installation And System Reference Guide

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 120
B93x/B94x keypads Configuration of SIM Username
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Network > [3] Cellular (common) > [2] SIM Username menu option.
3. Press [Edit] to edit the configuration.
4. Delete existing characters, if necessary, and then enter the new characters.
5. When finished, press the Save softkey to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
SIM Passcode
B91x/B92x keypads Configuration of SIM Passcode
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Network > [3] Cellular (common) > [3] SIM Passcode menu option.
3. Press [ENTER] to edit the configuration.
4. Delete existing characters, if necessary, and then enter the new characters.
5. When finished, press [ENTER] to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of SIM Passcode
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Network > [3] Cellular (common) > [3] SIM Passcode menu option.
3. Press [Edit] to edit the configuration.
4. Delete existing characters, if necessary, and then enter the new characters.
5. When finished, press the Save softkey to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
SIM PIN
B91x/B92x keypads Configuration of SIM PIN
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Network > [3] Cellular (common) > [4] SIM PIN menu option.
3. Press [ENTER] to edit the configuration.
4. Delete existing characters, if necessary, and then enter the new characters.
5. When finished, press [ENTER] to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of SIM PIN
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Network > [3] Cellular (common) > [4] SIM PIN menu option.
3. Press [Edit] to edit the configuration.
4. Delete existing characters, if necessary, and then enter the new characters.
5. When finished, press the Save softkey to save the programming.
6. When the keypad shows Parameter Saved, escape from the menu.
18.1.8 [3] RPS > [1] RPS Passcode Menu Parameters
The control panel verifies the remote programming software at the central station has valid access
before connecting using the RPS Passcode. In this menu, you can program the RPS Passcode.

Bosch D9412GV4 Specifications

General

Power Supply	12 VDC
Type	Control Panel
Model	D9412GV4
Manufacturer	Bosch
Operating Temperature	0°C to +49°C (+32°F to +120°F)
Compatible with	Conettix IP, GSM, GPRS, and POTS communicators