Dell PowerVault MD3200i User Manual

250 Troubleshooting: Your Storage Array Software
b Type the capacity in the GB box.
c Specify that the free capacity to be matched is less than, equal to, or
greater than the capacity entered in the GB box.
d Go to step 8.
8 Click Find Next .
To see every node that matches the criteria, click
Find Next repeatedly. If
no matches are found, the
Search Failed dialog is displayed. Click OK , and
re-enter the search criteria.
9 To close the dialog, click Cancel .
To continue searching for nodes with the same criteria after the
Find
dialog is closed, press <F3>.
Using Go To
Use the Go To option to quickly jump to an associated snapshot repository
virtual disk, snapshot virtual disk, source virtual disk, or target virtual disk.
These virtual disks are displayed in the
Logical pane of the Logical tab.
The Go To option is available only if the Snapshot premium feature or the
Virtual Disk Copy premium feature is enabled or if snapshot virtual disks or
virtual disk copies currently exist on the storage array. The Go To option is
not accessible from the Mappings tab of the AMW.
1
On the Logical tab of the AMW, select one of these virtual disks, and go to
the indicated step:
• Snapshot virtual disk—Go to step 2.
• Snapshot repository virtual disk—Go to step 3.
• Source virtual disk—Go to step 4.
• Target virtual disk—Go to step 5.
2 Select View  Go To  Snapshot Virtual Disk .
The selection jumps to the associated snapshot virtual disk in the
Logical
pane.
3 Select View  Go To  Snapshot Repository Virtual Disk .
The selection jumps to the associated snapshot repository virtual disk in
the
Logical pane.
book.book Page 250 Saturday, September 24, 2011 9:06 AM

Dell PowerVault MD3200i Specifications

General

HDD speed	15000 RPM
RAID levels	0, 1, 5, 6, 10
Storage drive capacity	600 GB
Storage drive interface	Serial Attached SCSI (SAS)
Maximum supported storage capacity	115.2 TB
Number of storage drives installed	12
Interface	RJ-45, SAS, PS/2
Connector(s)	4x RJ-45, 1x 6Gb SAS, 1x PS/2
Power supply type	AC
Dimensions (WxDxH)	446.3 x 561 x 86.8 mm
Power requirements	90 - 264 V, 47 - 63 Hz
Networking features	Gigabit Ethernet
Compatible operating systems	Windows, Linux, VMware, Hyper-V
Internal	No
LED indicators	HDD, Power, Power fail, Status
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Power consumption (typical)	25 W
Power supply unit (PSU) capacity	600 W

Weight and Dimensions

Weight	29300 g