98 Configuration: About Your Host
The
Preview
window is displayed.
11
Click
Finish
.
Removing Host Access
To remove host access:
1
In the AMW, select the
Mappings
tab, select the host node in the
Topology
pane.
2
Perform one of these actions:
• Select
Mappings
Remove
.
• Right-click the host node and select
Remove
from the pop-up menu.
The
Remove confirmation
dialog is displayed.
3
Ty p e
yes
.
4
Click
OK
.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Managing Host Groups
A host group is a logical entity of two or more hosts that share access to
specific virtual disks on the storage array. You create host groups with MDSM.
All hosts in a host group must have the same host type (operating system). In
addition, all hosts in the host group must have special software, such as
clustering software, to manage virtual disk sharing and accessibility.
If a host is part of a cluster, every host in the cluster must be connected to the
storage array, and every host in the cluster must be added to the host group.
Creating a Host Group
To create host groups:
1
In the AMW, select the
Mappings
tab.
2
In the
Topology
pane, select the storage array or the
Default Group
.
3
Perform one of the following actions:
• Select
Mappings
Define
Host Group
book.book Page 98 Saturday, September 24, 2011 9:06 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
