Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1003
Clears the traffic captured by the analyzer.
Syntax
analyzer clear <name>
Parameters
name: Name of the capture filter to use.
analyzer save
Saves the current captured traffic to a file.
Syntax
analyzer save <name> <path>
Parameters
name: Name of the capture filter to use.
path: The path and filename to save captured traffic to. If a relative path is provided,
/etc/config/analyzer will be used as the root directory for the path and file.
analyzer start
Start a capture session of packets on this devices interfaces.
Syntax
analyzer start <name>
Parameters
name: Name of the capture filter to use.
analyzer stop
Stops the traffic capture session.
Syntax
analyzer stop <name>
Parameters
name: Name of the capture filter to use.
clear dhcp-lease ip-address
Clear the DHCP lease for the specified IP address.
Syntax
clear dhcp-lease ip-address ADDRESS

Digi IX30 Specifications

General

Brand	Digi
Model	IX30
Category	Network Router
Language	English