Command line interface Command line reference
IX30 User Guide
1023
Parameters
None
show version
Show firmware version.
Syntax
show version [verbose]
Parameters
verbose: Display more information (build date).
show vrrp
Show VRRP status & statistics.
Syntax
show vrrp [name STRING] [all] [verbose]
Parameters
name: Display more details and config data for a specific VRRP instance.
all: Display all VRRP instances including disabled instances.
verbose: Display all VRRP status and statistics including disabled instances.
show web-filter
Show web filter status & statistics.
Syntax
show web-filter
Parameters
None
speedtest
Perform a speed test to a remote host using nuttcp or iPerf. The system's primary default route will be
used. The speed test will take approximately 30 seconds to complete.
Syntax
speedtest <host> [size INTEGER] [mode <nuttcp|iperf>] [output <text|json>]
Parameters
host: The name or address of the remote speed test host/server.
size: The number of kilobytes sent in the speed test packets. (Minimum: 0, Default: 1000)
mode: The type of speed test protocol to run. (Default: nuttcp)
To Next Page
Loading...
Need help?
General
