Digi IX30 User Manual

Firmware configuration Review IX30 default settings
IX30 User Guide
40
Interface
type Preconfigured interfaces Devices Default configuration
Local Area
Network
(LAN)
n
ETH2
n
Ethernet:
ETH2
n
Firewall zone:
Internal
n
IP address:
192.168.2.1/24
n
DHCP server
enabled
n
LAN priority:
Metric=5
n
Loopback
n
Ethernet:
Loopback
n
Firewall zone:
Loopback
n
IP address:
127.0.0.1/8
n
Default IP
n
Ethernet:
ETH2
n
Firewall zone: Setup
n
IP address
192.168.210.1/24
n
Default Link-local IP
n
Ethernet:
ETH2
n
Firewall zone: Setup
n
IP address
169.254.100.100/16
Other default configuration settings
Feature Configuration
Central
management
n
Digi Remote Manager enabled as the central management service.
Security policies
n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
l
Enabled for local administration
l
Firewall zone: Internal
Monitoring
n
Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n
SNMP: Disabled
Serial port
n
Enabled
n
Serial mode: Remote
n
Label: None
n
Baud rate: 9600
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None

Digi IX30 Specifications

General

Brand	Digi
Model	IX30
Category	Network Router
Language	English