Virtual Private Networks (VPN) IPsec
IX30 User Guide
379
3. Set the IPsec debug value:
config> vpn ipsec advanced debug value
config>
where value is one of:
n
none. (Default) No debug messages are written.
n
basic_auditing: Logs basic auditing information, (for example, SA up/SA down).
n
generic_control: Select this for basic debugging information.
n
detailed_control: More detailed debugging control flow.
n
raw_data: Includes raw data dumps in hexadecimal format.
n
sensitive_data: Also includes sensitive material in dumps (for example, encryption
keys).
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure a Simple Certificate Enrollment Protocol client
Simple Certificate Enrollment Protocol (SCEP) is a mechanism that allows for large-scale X.509
certificate deployment. You can configure IX30 device to function as a SCEP client that will connect to
a SCEP server that is used to sign Certificate Signing Requests (CSRs), provide Certificate Revocation
Lists (CRLs), and distribute valid certificates from a Certificate Authority (CA).
Required configuration
n
Enable the SCEP client.
n
The fully-qualified domain name of the SCEP server to be used for certificate requests.
n
The challenge password provided by the SCEP server that the SCEP client will use when
making SCEP requests.
n
The distinguished name to be used for the CSR.
Additional configuration
n
The number of days that the certificate enrollment can be renewed, prior to the request
expiring.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
To Next Page
Loading...
Need help?
General
