Digi IX30 User Manual

Firewall Packet filtering
IX30 User Guide
780
label My packet filter
protocol any
src_zone external
(config)>
4. To enable a packet filtering rule, use the index number with the enable true command. For
example:
(config)> firewall filter 1 enable true
5. To disable a packet filtering rule, use the index number with the enable false command. For
example:
(config)> firewall filter 1 enable false
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Delete a packet filtering rule
To delete a packet filtering rule:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.

Digi IX30 Specifications

General

Brand	Digi
Model	IX30
Category	Network Router
Language	English