Diagnostics Analyze network traffic
IX30 User Guide
934
Analyze network traffic
The IX30 device includes a network analyzer tool that captures data traffic on any interface and
decodes the captured data traffic for diagnostics. You can capture data traffic on multiple interfaces
at the same time and define capture filters to reduce the captured data. You can capture up to 10 MB
of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See Save captured data traffic to a file.
This section contains the following topics:
Configure packet capture for the network analyzer 935
Example filters for capturing data traffic 944
Capture packets from the command line 945
Stop capturing packets 946
Show captured traffic data 947
Save captured data traffic to a file 949
Download captured data to your PC 949
Clear captured data 951
To Next Page
Loading...
Need help?
General
