Digi IX30 User Manual

Serial port Electrical Signalling Mode
IX30 User Guide
259
Access Digi Remote Manager from the Digi Navigator
You can access Digi Remote Manager from the Digi Navigator. Within the Remote Manager, you can
configure and monitor your Digi devices.
For information about using Digi Remote Manager, refer to the Digi Remote Manager User Guide.
1. Make sure Digi Navigator is installed.
2. Launch the Digi Navigator.
3. Click the Digi Remote Manager link in the toolbar.
4. The Digi Remote Manager login screen launches.
a. Enter your Remote Manager user name and password.
b. Click Login.
Electrical Signalling Mode
The IX30 is a DTE serial device capable of supporting the RS-232, RS-422, or RS-485 electrical
signalling modes. The default setting RS-232 signaling.
This section contains the following topics:
Change the electrical signalling mode to RS-232 260
Change the electrical signalling mode to RS-422 261
Change the electrical signalling mode to RS-485 263

Digi IX30 Specifications

General

Brand	Digi
Model	IX30
Category	Network Router
Language	English