How to use this guide
This guide provides complete information for installing and operating a Unidrive SPMA and SPMD, with a SPMC or
SPMU rectifier, from start to finish.
The information is in logical order, taking the reader from receiving the drive through to fine tuning the performance.
There are specific safety warnings throughout this guide, located in the relevant sections. In addition, Chapter 1 Safety
Information contains general safety information. It is essential that the warnings are observed and the information
considered when working with or designing a system using the drive.
This map of the user guide helps to find the right sections for the task you wish to complete, but for specific information,
refer to Contents on page 4 to 5:
1 Safety information
3 Product information
5 Mechanical installation
6 Electrical installation
7 Getting started
8 Basic parameters
9 Running the motor
10 Optimisation
11 SMARTCARD operation
13 Advanced parameters
14 Technical data
15 Diagnostics
16 UL listing information
12 Onboard PLC
4 System configuration
2 Introduction
To Next Page
Loading...
Need help?
General
