6 Unidrive SPM User Guide
www.controltechniques.com Issue Number: 3
Declaration of Conformity
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonized standards:
These products comply with the Low Voltage Directive 2006/95/EC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the CE
Marking Directive 93/68/EEC.
Executive Vice President, Technology
Newtown
Date: 7th March 2007
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
SPMA1401 SPMA1402 SPMA1421 SPMA1422
SPMA1601 SPMA1602 SPMA1621 SPMA1622
SPMD1201 SPMD1202 SPMD1203 SPMD1204
SPMD1221 SPMD1222 SPMD1223 SPMD1224
SPMD1401 SPMD1402 SPMD1403 SPMD1404
SPMD1421 SPMD1422 SPMD1423 SPMD1424
SPMD1601 SPMD1602 SPMD1603 SPMD1604
SPMD1621 SPMD1622 SPMD1623 SPMD1624
SPMC1402 SPMC1601 SPMC2402 SPMC2601
SPMU1402 SPMU1601 SPMU2402 SPMU2601
EN 61800-5-1
Adjustable speed electrical power drive systems -
safety requirements - electrical, thermal and energy
EN 61800-3
Adjustable speed electrical power drive systems.
EMC product standard including specific test
methods
EN 61000-6-2
Electromagnetic compatibility (EMC). Generic
standards. Immunity standard for industrial
environments
To Next Page
Loading...
Need help?
General
