Emerson X-STREAM XE User Manual

Emerson Process Management GmbH & Co. OHGS-6
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
NOTES ON BATTERIES
• This instrument contains a Li battery (button cell) of type CR 2032.
• The battery is soldered and usually does not need to be replaced during the
instrument´s lifetime.
• At the end of lifetime, the instrument must be disposed in compliance with the wast
regulations. The disposal specialist then has to disassemble the instrument and
dispose the battery in compliance with the regulations.
• Batteries may leak, overheat or explode if not handled properly.
• Do not open or try to charge a battery.
• Do not expose batteries to heat or re.
AUTHORIZED PERSONNEL
In-depth specialist knowledge is an absolutely necessary condition for working with and
on the analyzer.
Authorized personnel for installing, operating, servicing and maintaining the analyzer are
instructed and trained qualied personnel of the operating company and the manufac-
turer.
It is the responsibility of the operating company to
• train staff,
• observe safety regulations,
• follow the instruction manual.
Operators must
• have been trained,
• have read and understood all relevant sections of the instruction manual before
commencing work,
• know the safety mechanisms and regulations.
To avoid personal injury and loss of property, do not install, operate, maintain or service
this instrument before reading and understanding this instruction manual and receiving
appropriate training.
Safety Instructions

Emerson X-STREAM XE Specifications

General

Brand	Emerson
Model	X-STREAM XE
Category	Measuring Instruments
Language	English