Epson Stylus Pro 9900 User Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
64
Maintenance
Daily Maintenance
Instructions for placing the
printer
Observe the following when setting up the
printer:
❏ Choose a flat and stable location that can
support the printer weight (about 135.1 kg for
Epson Stylus Pro 9900/9910 and 100.9 kg for
Epson Stylus Pro 7900/7910).
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Leave enough room for easy operation,
maintenance, and ventilation.
See "Choosing a place for the printer" in
the Unpacking and Setup Guide
❏ Operate the printer under the following
conditions (temperature is 10 to 35°C and
humidity is 20 to 80%).
Even when the conditions above are met, you
may not print properly if the environmental
conditions are not proper for the paper. Be sure to
use the printer where the paper conditions are
met. See the handling instructions of the paper for
more detailed information. Keep the printer away
from drying, direct sunlight, or heat sources to
maintain the appropriate humidity.
Notes for when you are not
using the printer
The print head nozzles are very small, thus, they
can become clogged easily if dust gets on the print
head. To avoid this, close the roll paper cover or
the front cover when you are not using the
printer. If you are not using the printer for a long
time, put a non-static cloth on the printer to avoid
getting dust on the printer.
Instructions for using paper
Notes for handling paper
See the instructions below and the handling
instructions of the paper for more details.
❏ Use Epson special media under the following
conditions (temperature is 15 to 25°C and
humidity is 40 to 60%).
❏ Do not bend the paper or scratch on the
surface of the paper.
❏ Keep fingers off the printable surface of the
media, as fingerprints may reduce the print
quality.
❏ Set the roll paper by handling the edges of the
roll paper. Whenever possible, use gloves to
handle media.

Epson Stylus Pro 9900 Specifications

General

Color	Yes
Maximum resolution	2880 x 1440 DPI
Media thickness	0.08 - 1.50 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll width	1118 mm
Display	LCD
Internal memory	64 MB
Country of origin	China
Drive device, buffer size	256 MB
Sound pressure level (printing)	50 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Fast Ethernet
Compatible operating systems	Microsoft Windows 2000, XP, XP 64-bit, Vista, MAC OSX 10.x.x
Power requirements	AC 100-240V 50/60Hz
Power consumption (active)	80 W
Power consumption (standby)	1 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	2040 mm
Package width	815 mm
Package height	1080 mm
Package weight	193053 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Dimensions (WxDxH)	1702 x 678 x 1196 mm