Epson Stylus Pro 9900 User Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
66
Replacing Ink
Cartridges
When ink needs to be
replaced/When ink gets low
When the Ink Check light is flashing, this
indicates that the ink level is low. If EPSON Status
Monitor is installed, a message appears on the
computer’s display that tells you the ink is low. If
the ink is low, you need to replace the ink
cartridge as soon as possible. You cannot continue
to print even if only one of the ink cartridges is
expended. If an ink cartridge runs out while
printing, replace it with a new one so the printer
can continue to print.
Windows
Mac OS X
Click How to to see the instructions on replacing
an ink cartridge.
Confirming the ink cartridge
remaining
Using the printer’s control panel
The remaining ink in the cartridges is always
displayed on the LCD panel.
See “Display” on page 14
You can check the accurate amount of ink
remaining in the PRINTER STATUS menu. You
need to check the amount of ink remaining before
printing a lot of data. If there is a low ink
cartridge, prepare a new one.
See “Using the Menu mode” on page 16
See “PRINTER STATUS” on page 24
Note:
When you replace the ink cartridges while the printer
is turned off, the remaining ink cannot be detected
correctly so the ink may become unusable before the
Ink Check light comes on and you cannot print
correctly. Follow the steps below to replace an ink
cartridge.

Epson Stylus Pro 9900 Specifications

General

Color	Yes
Maximum resolution	2880 x 1440 DPI
Media thickness	0.08 - 1.50 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll width	1118 mm
Display	LCD
Internal memory	64 MB
Country of origin	China
Drive device, buffer size	256 MB
Sound pressure level (printing)	50 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Fast Ethernet
Compatible operating systems	Microsoft Windows 2000, XP, XP 64-bit, Vista, MAC OSX 10.x.x
Power requirements	AC 100-240V 50/60Hz
Power consumption (active)	80 W
Power consumption (standby)	1 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	2040 mm
Package width	815 mm
Package height	1080 mm
Package weight	193053 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Dimensions (WxDxH)	1702 x 678 x 1196 mm