Copy
154
Copy
3
îš‹ Off
No cover is attached.
îš‹ Blank Cover
A blank sheet of paper is attached as the cover.
îš‹ Print on Both
The first and second pages of the document are copied on both sides of the cover.
îš‹ 1 Sided Covers Print Outside
The first and the last pages of the document is copied on the front side of the cover.
îš‹ Last Page on Back Cover
Select this check box to copy the image of the last document page onto the last page of the
copy sheets as a back cover. When you use [Divide Output] to divide a booklet into subsets,
the image of the last document page will be copied onto the last page of the last subset.
z
Depending on the number of pages in the original document, a blank page may be inserted before the last
page of a booklet.
îš„ Binding Shift
Displays the [Booklet Creation - Binding Shift] screen.
z
Refer to "Booklet Creation (Creating a Bound Booklet)" (P.152).
îš„ Divide Output
Displays the [Booklet Creation - Divide Output] screen.
z
Refer to "Booklet Creation (Creating a Bound Booklet)" (P.152).
îš„ Fold & Staple
Displays the [Booklet Creation - Fold & Staple] screen.
z
Refer to "Booklet Creation (Creating a Bound Booklet)" (P.152).
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
îš„ Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover
pages from [Cover Tray]. Select the same size of paper for [Main Body Tray] and [Cover
Tray], and also select the trays with paper loaded in landscape orientation ( ).
z
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.116).
[Booklet Creation - Binding Shift] Screen
This screen allows you to specify the binding shift value in the range from 0 to 50 mm in 1
mm increments.
To Next Page
Loading...
Need help?
General
