EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-V C2265

Fuji Xerox DocuCentre-V C2265 User Manual

Fuji Xerox DocuCentre-V C2265
565 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #503 background imageLoading...
Page #503 background image
Printing and Deleting Stored Jobs
503
Job Status
10
îš„ Yes
Starts printing the job. After printing, the job is deleted.
îš„ No
Cancels printing the job.
Charge Print
This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
authenticated users. You can also configure the machine to store print jobs temporarily,
and then print them from the machine’s control panel.
If received print jobs are set to be saved as Charge Print under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Charge/Private Print Settings] > [Receive Control],
the jobs are saved for each Billing ID. Any jobs that were not given a Billing ID on the print
driver are saved in [No User ID].
Reference
z
For more information on how to register user IDs on the machine, refer to "Tools" > "Accounting" > "Create/View User Accounts" in
the Administrator Guide.
Note
z
Unlike the Private Charge Print feature, the Charge Print feature can store jobs without a user ID, such as e-
mail printing and print jobs sent from ContentsBridge or CentreWare Internet Services, and can print the jobs
after authenticating users.
z
[Charge Print] appears when [Save as Charge Print Job] is selected by using one of the following procedures in
the System Administration mode:
z
Select [Save as Charge Print Job] in [Receive Control].
z
Select [According to Print Auditron] in [Receive Control], and then select [Save as Charge Print Job] in [Job
Login Failure].
z
Select [According to Print Auditron] or [Save as Private Charge Print Job] in [Receive Control], and then
select [Save as Charge Print Job] in [Job without User ID].
Reference
z
For information on how to set Charge Print, refer to "Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/
Private Print Settings" in the Administrator Guide.
The following describes how to print and delete a job stored with the Charge Print feature.
1 Press the <Log In/Out> button on the control panel, or select the login information field on
the touch screen.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C2265

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C2265 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C2265 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-V C2265
CategoryAll in One Printer
LanguageEnglish

Related product manuals