Copy
170
Copy
3
2 Select any option.
îš„ Control Number
îš‹ Do Not Add
No control number is printed.
îš‹ Add
A control number is printed. Enter the starting number of the control number. You can
specify a value in the range from 1 to 999, using [+] and [-] or the numeric keypad.
îš„ Stored Watermarks
Displays the [Stored Watermarks] screen.
z
"Watermark (Printing Control Numbers on the Background of Copies)" (P.169).
îš„ User Account Number
Allows you to select whether to print a user account number when the Authentication or
Accounting feature is enabled. However, if a user is not authenticated, the account number
will not be printed.
z
[User Account Number] is the No. (User Administration Number) registered by users with the Authentication
and Accounting feature.
z
You can see if a user is authenticated by checking that the <Log In/Out> button lights up.
îš„ Date & Time
Allows you to select whether to print the date and time when the copy job started.
z
For information on the date format, refer to "Tools" > "Common Service Settings" > "Watermark" > "Date Format" in the
Administrator Guide.
îš„ Serial Number
Allows you to select whether to print the serial number of the machine.
îš„ Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
z
If the [Original Orientation] setting differs from the actual document orientation, the machine may not
detect the top of the document correctly.
To Next Page
Loading...
Need help?
General
