Output Format
179
Copy
3
ID Card Copy(Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
1 Specify the orientation of the document in [Original Orientation] on the [Layout
Adjustment] screen.
2 Place the document slightly away from the top left corner of the document glass, and close
the document glass.
z
Always use the document glass when copying. You cannot use the document feeder with this feature.
z
Specify the orientation of the original document correctly.
z
If the edges of the image are missing, slightly move the card inward on the document glass so that the whole
image can be scanned.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID card in a different
orientation from the original orientation depending on the magnification ratio specified. For information on
the copy magnification ratio for ID Card Copy, refer to "Tools" > "Common Service Settings" > "Copy Service
Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the Administrator Guide.
z
For information on how to specify the orientation of a document, refer to "Original Orientation (Specifying the Orientation of
Loaded Documents)" (P.148).
Original document
Front side
Back side
Original orientation
Copied output
Front side
Back side
To Next Page
Loading...
Need help?
General
