4. HOW TO CONTROL CHART OBJECTS
4-3
4.2.2 Basic Setting menu
To display this menu, click [DISP], [SET] and [Basic Setting] on the InstantAccess
bar
™
.
Light Popup: Show or hide light sectors information.
[ON] provides light sector information (including length
of arc of visibility) when the cursor is put on a light or
light sector.
Attributes Display: Select how to show chart object
information in the [Pick Report] dialog box, [Text Box]
or [List].
List: Show the information in a list, like the one shown below.
Text Box: Show the information in a text box, like the one shown below.
TM Reset: In the true motion mode, own ship moves until it reaches the true motion
reset borderline (set here), and then it jumps back to an opposite position on screen
based on its course. Set the limit for TM reset (in percentage). For example, “80” re-
sets the position when the own ship marker is at a location which is 80% of the range.
Light house infoLight house info
Light sector centerLight sector center
To Next Page
Loading...
Need help?
General
