Furuno FMD-3200 User Manual

19. RECORDING, PLAYBACK FUNCTIONS
19-10
19.5.1 How to filter the danger targets log
You can filter the danger targets log by CPA or TCPA. When a TT or AIS target’s CPA
or TCPA is lower than the setting here, the target’s details are automatically logged.
To set the filter, do the following:
1. Open the menu and select [Log], [Target Log] and [Danger Target] to show the
[Danger Targets] menu.
2. At [CPA/TCPA], select [ON].
3. At [CPA], set the distance for the CPA.
4. At [TCPA], set the time for the TCPA.
Note: [Log Interval] is fixed at 10 minutes.
5. Click [Save] to save the settings, then click [Close] to close the menu.

Furuno FMD-3200 Specifications

General

Brand	Furuno
Model	FMD-3200
Category	Marine Equipment
Language	English